Chemical Fix Polyester Mortar Resin Zetapro
Chemical Fix Polyester Mortar Resin Zetapro Chemical Fix Polyester Mortar Resin Zetapro Chemical Fix Polyester Mortar Resin Zetapro

Chemical Fix Polyester Mortar Resin Zetapro

From £8.47 excl. vat
(£10.16 incl. vat)

Zetacartridge No 1 is a high performance, Suitable for use in concrete, brickwork and stone. Fast curing two-part resin anchoring Suitable for fixing wall ties, starter bars, studs & bolts. System based on unsaturated Polyester, suitable for close edge fixings. Resin in styrene. Pre-packed in a 10:1
Manufactured in the UK with ETA Approval and CE Marked
Supplied in a 400ml cartridge.

Choose an option below:

Quantity

  • Chemically resistant.
  • Waterproof & vibration proof.
  • Ratio cartridge for ease of use.
  • Crack and gap filling.
  • Damp and wet holes.

How to use
Unscrew the cap from the cartridge and screw on the static mixer nozzle. Fit the cartridge into the
applicator gun and gradually apply pressure to the trigger until the material exudes from the end of
the nozzle. You should always waste the first 10cm or so of resin until you get an even colour. Insert
the nozzle into the hole & gun the material out, removing the nozzle slowly as the hole fills up. Once
sufficient resin is in the hole, release the pressure from the gun and place the stud to be fixed into the
hole with a twisting action to ensure full contact between hole, resin & stud. Allow resin to cure fully
before loading. Please see label on cartridge for full installation instructions.

ADD A REVIEW